NPAP Evaluation Reference Design

This guide focuses on the most common setup and testing procedures to enable you to run practical evaluations using the NPAP Evaluation Reference Design (ERD).

It is divided into two parts:

1. The chapter Evaluation Reference Design Overview is your primary reference for identifying the correct configuration. Use the table to find the IP address and specifications for your specific board and design.

2. Chapter How to evaluate NPAP using the Evaluation Reference Design provides the hands-on commands for setting up your host PC and performing initial connectivity and performance tests with tools like ping and netperf.

Follow these instructions to quickly establish a connection and begin your evaluation.

• 1. Evaluation Reference Design Overview
  • 1.1. Overview over Supported Development Boards
  • 1.2. Synchronous vs Asynchronous MAC
  • 1.3. SPF Port Location
    • 1.3.1. Overview MLE NPAC-KETCH:
    • 1.3.2. Overview AMD ZCU111:
    • 1.3.3. Overview AMD ZCU102:
    • 1.3.4. Overview Avnet Tria AUB15P:
    • 1.3.5. Overview AMD Alveo U200:
    • 1.3.6. Overview AMD Alveo U55C:
    • 1.3.7. Overview Arrow Agilex 5 Eagle:
    • 1.3.8. Overview Lattice Versa-G:
    • 1.3.9. Overview Microchip MPF300:
    • 1.3.10. Overview Trenz TE0950:
• 2. How to evaluate NPAP using the Evaluation Reference Design
  • 2.1. IP and Port Numbers
  • 2.2. Bring up Ethernet Port on the PC Side
  • 2.3. PING
  • 2.4. Netperf
  • 2.5. TCP Loopback
  • 2.6. UDP Loopback