9. Changelog

Table of Contents

9. Changelog
- 9.1. NPAP Version 2 Development
9.2. NPAP Version 1 Development

The following lists MLE’s engineering changelog for NPAP. With the release of NPAP v2.2.0 the development cycle has changed from 1.x to 2.x.

Version 2.4.5 uses the least amount of resources and includes no diagnostics.
Version 2.5.0 and onwards requires VHDL-2008. VHDL-2008 is not fully supported in Quartus Prime Standard, for example. Please inquire with any questions regarding tool support.

9.1. NPAP Version 2 Development

20260630
- No DIag (and no VHDL-2008)
- TB2026xxxx Latency / RTO
- Hybrid TC
20260228
- NPAP Kernel v2.9.0
  - TCP
    - #6668 – rework handling of RTO settings
    - #7734 – add simulation timeout to TCP transmit module to shorten establish time in simulation
- ERD v3.4.11
  - all
    - bump ERD to v3.4.11
    - #6525 – fix naming by using different names for same signals
    - #6668 – update RTO signals naming between TDA and TCA
    - #7804 – fix psh signal connection between TDA and TCA
  - IP
    - update to NPAP v2.9.0
    - update to TDA v5.0.0
    - update to TCA v5.0.0
20260131
- NPAP Kernel v2.8.1
  - GENERAL
    - #7630 – add support for Quartus Prime Standard Edition
  - TCP
    - #7516 – fix data segment handling if TCP receiver is turned off
    - #7722 – fix TcpCmdStopRecv command does not disable TCP receiver
    - #7723 – improve code readability and quality
- ERD v3.4.10
  - all
    - bump ERD to v3.4.10
  - altera_storey_peak_source_full_10g_async_npap2
    - #7625 – new ERD 105 for Microsoft Catapult v2 Storey Peak
  - IP
    - update to NPAP v2.8.1
    - update to Netperf v4.0.1
    - update to MAC 10GBE v.1.2.1

To read the full content, please log in or register as an MLE Developer Zone Member.